Screen Protection Application Instructions

APPLICATION INSTRUCTIONS

The following application steps have been prepared for a perfect application. Please read the steps first and ensure you are working in a clean environment.

Step 1. Wipe your iPhone screen with the ‘Cleaning Wipe’ provided. Allow your screen to dry for a few seconds.

Step 2. Examine your screen to make sure it is dry and dust or grit-free. If you have any dust particles visible, remove them with the ‘Dust removal stickers’ provided. IMPORTANT NOTE: DO NOT use your fingers or blow air on the screen.

Step 3. Once completely clean, using one hand, fasten the kit tray by holding the two sides (left and right long length). Press the back of the tray gently with your forefinger. This will release the foam shield from the other side of the kit,

Step 4. With the other hand, push gently in the middle of the acrylic board with your thumb and remove the protective acrylic board from the glass side of the kit carefully.

Step 5. IMPORTANT NOTE: The glue face of the screen protector is now exposed, so quickly turn the kit face down so the yellow arrow sticker is facing up. Carefully place the application kit over your iPhone. Make sure the Arrow is facing up toward the camera of the iPhone.

Step 6. Press on the center of the yellow arrow sticker until the screen protector has released off the kit.

Step 7. Gently pull the arrow sticker away while holding down the tray with your other hand.

Step 8. Remove the application tray and with the yellow cleaning cloth provided, Wipe the face of the iPhone.